Privacy Devices/
Bug Detectors

Micro Bug Detector High Frequency

Protect privacy and confidential information with our high frequency RF detector. This device features a detecting frequency up to 6 GHz and comes with an analog/digital detection switch. The digital feature detects bluetooth, WLAN, Wi-Fi, cellular phone and digital spread spectrum wireless products. Specially designed for easy and simple use with no complex installation or professional knowledge required.

Features:
Digital/analog switch for signal strength
3 LED indicators to determine signal strength
Audible alarm with tonal change indicates signal strength
Vibration warning mode
User can use earphones for convenient monitoring of audible alarm
Senstivity tuner
3V DC power (uses 2 AAA batteries, included)
50 MHz to 6.0 GHz
Detects wireless cameras at 5.8 GHz from approximately 2 feet and 2.4 GHz from approximately 5 feet
Detects analog cell phone signals from approximately 20 feet and digital signals from approximately 40 feet
Specifications:

Size: (L)87 x (W)55 x (T)24 (mm)

Weight: about 105g

Detecting range: 50MHz~6.0GHz

Power: 3V DC (AAA/UM-r battery x 2)

Warning mode 1: Audible alarm and 3 LEDs

Warning mode 2: Vibration and 3 LEDs

Warning mode 3: Vibration, 3 LEDs and earphone output

Detecting distance: for regular 10mW 5.8GHz wireless camera: 8 feet

Detecting distance: for regular 10mW 2.4GHz wireless camera: 20 feet

Detecting distance:

for Cellular phone: 40 feet (set at analog)

for Cellular phone: 60 feet (set at digital)

Includes
Earpeice
Pocket clip
Size
3 1/2" x 2 1/4" x 1"

Add to Basket	Description	Price
	RF Signal/Bug Detector	$99.00

VCD-42 Video Camera Detector

The VOX Buster is the only device on the market today that will defeat VOX recorders. Because of the compact size of most VOX recorders, they are sometimes difficult to locate. When the VOX Buster is attached to your telephone line, voice activated telephone tape recorders will run constantly, filling the tape.

A continuous tone is fed through your telephone line, eliminating voice-activated recordings. No batteries needed, because the unit is line powered. Easy to install; simply plug into any of your telephone jacks, protecting all extensions.

VCD-43 Advanced Video Camera Detector

To detect even very small video cameras, move up to the VCD-43. This unit features a five-step solid-state meter that can help you zero in on those hidden video cameras.
The sensitive external antenna is specially designed to pick up the horizontal oscillator frequency radiated by video cameras. Once the video camera is detected, its location can be quickly determined by using the five-step LED meter and Sensitivity control. Tests with various cameras show a detection range of 2 to 15 feet, depending on the type of camera.

The unit can be factory tuned to frequencies other than the NTSC standard; such as PAL and SECAM. For special tuning, please specify when ordering.

The VCD-43 has a rugged aluminum housing, measures 4.25" x 2.25" x1.25", weighs 10 oz., and is furnished with two 9 volt batteries, plug-in antenna and illustrated instructions.

Add to Basket	Description	Price
	VCD-42 Video Camera Detector	$139.00
	VCD-43 Video Camera Detector	$219.00

CMS-11 Countermeasures Set

The CMS-11 Countermeasures Set is designed for the person who wants to be able to perform the basic countermeasures checks either for his own security or as a business offering the service to others.

The set is built around the TD-53 Advanced Transmitter Detector and consists of the following items:

TD-53 Advanced Transmitter Detector

If you suspect your premises are bugged, for your own peace of mind, check it out. The TD-53 can be used to detect, verify and locate hidden transmitters in your home, office or car.
P-02 INFRARED (IR) PROBE

Light beams, especially lasers, provide an excellent method for carrying audio intelligence and are not detectable by RF (radio frequency) detectors. The P-02 is a special probe which allows you to search for sources of infrared (IR) transmissions. In the case of amplitude modulated or pulse frequency modulated sources, you can actually listen and determine if the IR beam is carrying voice or other intelligence.
P-03 LINE DRIVER

The P-03 Line Driver Probe lets you use the TD-53 for checking wire pairs for hidden microphones. One of the two LEDs on the P-03 alerts you to the presence of voltage on a wire pair. The other LED alerts you to current flow in a wire pair when the Line D river switch is operated. The Line Driver switch applies a voltage to the wire pair under test to turn on voltage activated microphones. The A/B switch reverses the polarity of the voltage for detecting polarity sensitive devices. You can also monitor the wire pair through the TD-53 amplifier and speaker to determine if room audio is present on the pair. Any of the above conditions can indicate a microphone attached to the wire pair under test.
P-04 CARRIER CURRENT/VIDEO CAMERA PROBE

The P-04 is used in conjunction with the TD-53 for detecting carrier current transmitters and concealed video cameras. Examples of carrier current transmitters are the wireless intercoms and room monitors sold in many electronics stores and catalogs. Carr ier current eavesdropping devices can be connected to power lines, phone lines or other wire pairs.The probe covers from 10 KHz to 600 KHz in two ranges. It uses a directional pickup loop and no connection to the power lines or other wires under test is n ecessary. Any demodulated audio is fed to the TD-53 for monitoring and verification purposes.
TT-07 WIRETAP DETECTOR

While it is useful (almost necessary), the telephone is the most serious threat to your privacy in existence today. Your phone line can be wiretapped or bugged and the telephone instrument itself can be quickly and easily converted to a very efficient room monitor.
Also Include:

Headphones
Padded carrying case
Instruciton manual
Various cords and adapters

CMS-15 Countermeasures Set

The set is built around the TD-53 Advanced Transmitter Detector and consists of the following items:

TD-53 Advanced Transmitter Detector

If you suspect your premises are bugged, for your own peace of mind, check it out. The TD-53 can be used to detect, verify and locate hidden transmitters in your home, office or car.
P-02 INFRARED (IR) PROBE

Light beams, especially lasers, provide an excellent method for carrying audio intelligence and are not detectable by RF (radio frequency) detectors. The P-02 is a special probe which allows you to search for sources of infrared (IR) transmissions. In the case of amplitude modulated or pulse frequency modulated sources, you can actually listen and determine if the IR beam is carrying voice or other intelligence.
P-03 LINE DRIVER

The P-03 Line Driver Probe lets you use the TD-53 for checking wire pairs for hidden microphones. One of the two LEDs on the P-03 alerts you to the presence of voltage on a wire pair. The other LED alerts you to current flow in a wire pair when the Line D river switch is operated. The Line Driver switch applies a voltage to the wire pair under test to turn on voltage activated microphones. The A/B switch reverses the polarity of the voltage for detecting polarity sensitive devices. You can also monitor the wire pair through the TD-53 amplifier and speaker to determine if room audio is present on the pair. Any of the above conditions can indicate a microphone attached to the wire pair under test.
P-04 CARRIER CURRENT/VIDEO CAMERA PROBE

The P-04 is used in conjunction with the TD-53 for detecting carrier current transmitters and concealed video cameras. Examples of carrier current transmitters are the wireless intercoms and room monitors sold in many electronics stores and catalogs. Carrier current eavesdropping devices can be connected to power lines, phone lines or other wire pairs. The probe covers from 10 KHz to 600 KHz in two ranges. It uses a directional pickup loop and no connection to the power lines or other wires under test is n necessary. Any demodulated audio is fed to the TD-53 for monitoring and verification purposes.
TT-46 ADVANCED WIRETAP DETECTOR

While it is useful (almost necessary), the telephone is the most serious threat to your privacy in existence today. Your phone line can be wiretapped or bugged and the telephone instrument itself can be quickly and easily converted to a very efficient room monitor.
Also Includes:

Headphones
Padded carrying case
Instruction manual
Various cords and adapters

Add to Basket	Description	Price
	CMS-11 Countermeasures Set	$925.00
	CMS-15 Countermeasures Set	$1075.00

JM-20 PRO RF Detection Meter

The JM-20 PRO is a time proven high quality and dependable RF detection meter. Now updated to detect RF signals from 1MHz to 6GHz. New high-gain flexible antenna covers entire frequency range, no need to switch antennas and double your work to find bugging devices! No longer can the new 4.2 and 5.8 GHz transmitting devices hide form the JM-20 PRO. The compact size and silent vibration alert enables you to conceal it on your body for private sweeping of wireless listening and video transmissions. The JM-20 PRO, with it's 5 section bar graph to detect proximity of transmitters, has also proven itself as a quality professional sweep unit. It's sturdy and durable metal case assures years of service. Powered by a rechargeable NiCad battery, unit comes complete with recharger and earphone.

Features:

Ultra Sensitive Five Section LED bar Graph

Silent Alert Mode-Vibration

Variable Tone Alert

Built-in Rechargeable Battery

High Frequency Coverage 1MHz-6GHz

Earphone included

New Flexible Hi-Gain Antenna

RF Sensitivity Adjustment

Heavy Duty Metal Case

JM-20F HANDHELD RF DETECTOR

(W/ BARGRAPH & FREQUENCY COUNTER)
The JM20F provides the latest technology in RF (bug) detection. Sophisticated microprocessor circuitry makes sweeping for RF transmitters fast and efficient. Detects and displays 1MHz-3GHz. 6 full hours use on a single charge.

FEATURES:

"Rubber Duck" wide band antenna
10- digit liquid crystal display
Ultra sensitive 16 section bar graph
A microprocessor filter circuitry which prevents nuisance alarms from random RF "noise"
Silent vibration alarm
Battery low indicator
Built in NiCad battery (includes recharger)
The frequency range is from 1 MHz-3GHz with a battery life of 6 hours.

Specifications:

SIZE IS 3.3 x 2.27 x 1.2 inches

Includes: owner's manual, AC adapter

Add to Basket	Description	Price
	JM-20 PRO RF Detection Meter	$165.00
	JM-20F HANDHELD RF DETECTOR	$199.00

LaserScan Professional Camera Locator

Introducing the Pro Extreme LaserScan hidden camera locator. By far, the most powerful detector/locator of wireless or wired hidden cameras on the market today. Two high-power alternately pulsating laser frequency beams scan for camera lenses up to 50 ft. away. Hidden cameras are easily and quickly located and viewed as bright flashing red lights by simply looking into the 4X magnified, focus adjustable, optical glass view port. Due to laser frequencies focused on camera lens reflectivity, "false" alerts are virtually eliminated. Locates ALL kinds of cameras, including pinhole and cameras hidden inside objects such as clock radios, smoke detectors, etc. A "must have" tool for police, private investigators, security professionals, or virtually anyone that that wants privacy assurance. No special training required.

Specifications:

Power: 4 "AAA" Batteries

Locator: Dual High Power Red Laser Frequency LEDs

View Port: 4X Adjustable Focus Optical Glass Lens

Weight: 150 Grams

Dimensions: 100 X 50 X 33mm.

Add to Basket	Description	Price
	LaserScan Professional Camera Locator	$259.00

Hidden Cameras • Video Surveillance • Telephone Recording/Accessories • Audio Surveillance • Microphones
Privacy Devices/Bug Detectors • IP Internet Cameras • Books • Loss Prevention/Spy Gear • Vehicle Tracking
• Site Map •Terms of Sale•Home Page

© 2002 Xtreme Business Solutions
MICNIC TECHNOLOGIES, INC.
3838 Raymert Drive Suite 3
Las Vegas, NV 89121

Phone Sales Desk open 8 AM to 7 PM PDT (11 AM-10PM EDT)

702-436-4970
702-616-9787 Fax